Vk-172 Driver Here

sudo cat /dev/ttyACM0 (Output example: $GPGGA,123519,4807.038,N,01131.000,E,1,08,0.9,545.4,M,46.9,M,,*47 )

sudo usermod -a -G dialout $USER Log out and back in. vk-172 driver

Plug in the VK-172 and run:

Use any serial terminal (PuTTY, Tera Term, or GPS software like u-center or VisualGPS). Connect to the assigned COM port at 9600 baud (or 115200), 8 data bits, 1 stop bit, no parity. sudo cat /dev/ttyACM0 (Output example: $GPGGA,123519,4807

This document explains how to verify, install, and troubleshoot the necessary drivers for the VK-172 on Linux, Windows, and Android. The VK-172 is plug-and-play on most Linux distributions. The kernel includes the cdc_acm driver. This document explains how to verify, install, and

usb 1-1.2: new full-speed USB device number 6 using xhci_hcd usb 1-1.2: Product: u-blox 7 - GPS/GNSS Receiver cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device The device will be created as /dev/ttyACM0 or /dev/ttyUSB0 . Check with: