Scs Tool Platinum Arkand Series May 2026

You’ll know it’s different. The grind is harder—you feel the resistance. That’s the wear resistance talking.

They use a multilayer AlTiN + Si (Silicon) coating, branded as "Arkand-Protect." In practice, it’s a dark purple/bronze hue (not the usual black). The silicon layer is key here: it provides a higher hot hardness ceiling, allowing for dry or near-dry machining up to 1100°C interface temps without catastrophic coating failure. 2. Performance in the Wild (Stainless, Titanium, and Hardened Steel) I tested the 1/2" 4-flute variable helix end mill and a 3/8" coolant-through drill. scs tool platinum arkand series

I’ve finally had the chance to put the through its paces over the last six months. For those who don’t know, SCS Tool (Specialty Cutting Solutions) has been quietly building a reputation for bridging the gap between premium Asian imports and top-tier European/US brands. The "Platinum" line is their flagship, but the Arkand Series —their sub-label for high-cobalt, ultra-wear-resistant end mills and drills—is where things get interesting. You’ll know it’s different

Let’s break down what this series actually is, who it’s for, and whether the premium price tag delivers real shop-floor ROI. First, let’s clear up a misconception. The "Arkand" name isn’t just marketing fluff. SCS claims it’s a proprietary powder-metallurgy cobalt blend (think M42 on steroids, but with a finer, more uniform carbide structure). Standard M35 has ~5% cobalt; M42 has ~8%. The Arkand series reportedly sits in the 9-10% cobalt range , but with a vanadium carbide refinement process that reduces grain size. They use a multilayer AlTiN + Si (Silicon)

This is the real test. Titanium loves to gall and weld to cutting edges. The Arkand-Protect coating plus the high cobalt’s toughness meant I could run at 120 SFM (aggressive for Ti with cobalt HSS, not carbide) with a .0015" chip load. No built-up edge after 45 minutes of roughing. The edge retention was surprising—I saw about 30% longer tool life compared to a leading brand’s premium cobalt series.

ToolroomTech_42 | Category: Cutting Tools & Advanced Materials