Image 1 of 1
Leishman emphasizes that BET must be combined with inflow models (e.g., Glauert’s theory or free-vortex methods) because the induced velocity distribution over the disk is non-uniform—higher at the retreating blade side, lower at the advancing side, especially in forward flight. In forward flight, the advancing blade experiences higher relative airspeed than the retreating blade. Without compensation, this would roll the helicopter violently. The solution is blade flapping : blades are hinged at the root (or made of flexible materials) to allow upward or downward motion. As an advancing blade produces more lift, it flaps up, reducing its angle of attack (due to the resulting downward relative velocity). The retreating blade flaps down, increasing its angle of attack. This equalizes lift across the disk.
BET reveals the importance of blade twist : linear twist (e.g., (-10^\circ) from root to tip) ensures that the induced velocity distribution matches the blade pitch, avoiding excessive tip angles of attack that could cause stall. Modern rotor blades also use tapered tips, swept tips (e.g., the BERP rotor), or anhedral to reduce tip losses and delay compressibility effects. Leishman emphasizes that BET must be combined with
occurs on the retreating blade when rapid pitch-up motions cause a large vortex to form on the suction surface. This vortex briefly increases lift (useful for flight), but when it sheds, lift collapses abruptly, and nose-down pitching moment occurs—causing violent vibrations and control loads. Leishman’s text includes extensive wind-tunnel data and semi-empirical models (e.g., the Leishman–Beddoes model) that predict dynamic stall onset and the associated hysteresis in lift, drag, and moment coefficients. The solution is blade flapping : blades are
In vertical climb, the induced velocity decreases, reducing induced power; in descent, the flow reverses through the rotor, leading to the dangerous condition of vortex ring state , where recirculating vortices cause loss of lift and erratic control—a key safety topic in rotorcraft aerodynamics. While momentum theory gives global performance, blade element theory resolves forces along each rotor blade. The blade is divided into small segments, each behaving like a 2D airfoil. The local angle of attack depends on pitch setting, inflow angle, and blade motion. For each element, lift and drag coefficients (from airfoil data) yield thrust and torque contributions. Integrating along the blade span provides total rotor thrust and power. This equalizes lift across the disk