If the fan twitches but doesn't spin, pull the CMOS battery for 10 minutes. Then, remove all RAM and expansion cards. If you get beep codes, the board is alive. If you get nothing, suspect the I/O chip (SMSC or Nuvoton) near the parallel port. The Bottom Line You probably won't find a clean, high-resolution schematic for the Dell OptiPlex 780. The few that exist online are either watermarked, incomplete, or for the wrong revision (e.g., 781 vs. 780).
Have you successfully found a schematic for the 780? Or are you stuck on a "no POST" condition? Drop a comment below (or head to Badcaps.net)—let’s keep these old warhorses running. This post is for educational purposes. Reverse engineering or distributing copyrighted schematics may violate laws in your jurisdiction. Always attempt repairs at your own risk. dell optiplex 780 schematic diagram
| Rail | Typical Voltage | Test Point | | :--- | :--- | :--- | | VCC3 (Standby) | 3.3V | Always on. Check the CMOS battery header or USB ports. | | VCC5 (Standby) | 5V | Check the PS/2 ports (if present). | | PWR_BTN# | 3.3V -> 0V -> 3.3V | Drops low when you press the power button. | | PS_ON# | 5V (off) -> 0V (on) | Pulled low by the PSU to turn on main rails. | If the fan twitches but doesn't spin, pull