Pinout - Dcm3.5

The Delphi DCM3.5 is one of the most common Engine Control Units (ECUs) found in modern diesel engines, particularly within the Stellantis (formerly PSA Peugeot Citroën) , Ford , BMW , and Suzuki vehicle families. It is widely used in 1.4 HDi, 1.6 HDi (DV6), and 2.0 HDi (DW10) engines, as well as certain Ford Duratorq (DLD-416/DLD-418) and BMW diesel applications.

| Pin | Signal | Description | |------|--------|-------------| | A18 | BATT+ | Permanent battery positive (30) | | A31 | BATT+ | Permanent battery positive (30) | | A4 | GND | Main power ground (31) | | A5 | GND | Main power ground (31) | | A32 | GND | Main power ground (31) | | A48 | SW_BATT+ | Switched battery positive from main relay (15) | | A19 | +5V VCC | Sensor supply (5V reference) | | A6 | GND_SENS | Sensor ground reference | ⚠️ Always use a fused power supply when bench testing. Connecting pins incorrectly can permanently damage the ECU. The DCM3.5 controls solenoid injectors (typically Bosch or Delphi piezoelectric or solenoid type depending on variant). Injector pins are high-current outputs. dcm3.5 pinout